Plantronics Savi Office WO350 User Manual download pdf (Page 7)

Plantronics Savi User Guide 7

2 Base set-up

2.1 Attaching charging cradle to base

1 Connect the headset charging cradle to the base. Push

ﬁrmly on the cradle until the cradle snaps into place.

30 cm

15 cm

2.2 Connecting base to desk phone

1 Connect the telephone interface cable to the telephone

interface cable jack on the base.

2 Disconnect the handset coil cord from the desk phone.

3 Connect the telephone interface cable to the now open

handset port on the desk phone.

4 Connect the handset coil cord to the telephone interface

cable junction box.

5 Place the handset back on the telephone cradle.

2.3 Connecting power supply to base

1 Connect the base power supply into the power jack on

the base.

2 Connect the power supply to outlet.

2.4 Positioning base

The minimum recommended separation between your desk

phone and the base is 15 cm.

The minimum recommended separation between the base and

computer is 30 cm. Incorrect position can cause noise and inter-

ference problems.

NOTE If your phone has a built-in headset port, you should only

use the headset port if you will not be using the HL10 lifter. In this

conﬁguration, you must press both the headset button on your

phone and the call control button on the headset to answer or

end calls.

1 2 3 4 5 6 7 8 9 10 11 12 ... 24 25

No comments

Plantronics Savi Office WO350 User Manual Page 7