Plantronics Voyager 510-USB User Manual download pdf (Page 4)

Before using your headset for the first time, you must pair it with your Bluetooth phone or

device. Ensure that the headset is fully charged. For instructions on setting up and pairing

with Bluetooth devices other than mobile phones, please consult your Bluetooth device

user guide.

Turn on both devices.

6 7

POWERING PAIRING

Powering headset

Powering USB Bluetooth adapter

Pairing headset with Bluetooth phone

The USB Bluetooth adapter is automatically powered on upon inserting into the USB port

of the computer. If the USB port on your computer is hard to access, you can use the USB

extension cable.

NOTE: The USB Bluetooth adapter is automatically active with the current paired headset

when powered on.

Press and hold the power/mute button

for three seconds to turn the headset

on or off.

The indicator light flashes blue when the

headset is on.

The indicator light will flash red when

the battery becomes low.

1. Simultaneously press the listen

volume adjust button marked +

(volume up) and the call control

button. Release the buttons when the

indicator light begins to flash red then

blue.

2. While the headset is flashing red and

blue, use the phone menu to search

for Bluetooth devices and select “510

Plantronics”.

3. When prompted for password, enter

0000. The headset will flash blue when

paired successfully.

1 2 3 4 5 6 7 8 9 10

No comments

Plantronics Voyager 510-USB User Manual Page 4