Plantronics WO101 User Manual download pdf (Page 15)

Plantronics Savi User Guide

Conferencing In Up to Three Additional

Headsets

While on a call you can subscribe up to three additional headsets

to your base for conferencing. As you add headsets to the base

an additional headset icon will appear in the Plantronics software

screen with a number from 1 to 3 indicating the number of

additional headset subscribed to the base.

Guests may conference in as described below:

1 While you are on a call:

a) Place the guest’s headset into primary user’s charge

cradle.

b) Place the guest’s headset into over-the-air

subscription mode by pushing the headset volume

up button for three seconds until the indicator light

becomes solid green.

2 Short press (less than one second) the subscription

button on the base.

The subscription light will ﬂash yellow and green.

3 The subscription light will then turn solid yellow and you

will hear a tone in the master headset indicating a guest

wishes to join the call.

4 If you press the call control button on the master

headset within ﬁve seconds, the guest is joined to the

call.

If you do not press the call control button within ﬁve seconds,

the request to join the call is rejected and the guest will hear an

error tone in their headset.

5 Guests may leave the conference call by pressing their

call control button.

When they do you will hear a single tone in the master headset

as each guest leaves the call.

To see how many headsets are subscribed to the base, refer to

the lower left corner of the Plantronics software screen. The ﬁrst

headset is the master headset and the number inside the next

headset is the number of guest headsets subscribed to the base.

The examples below show 1, then 2, then 3, guest headsets

subscribed to the base in addition to the master headset.

Headset Docked Headset Undocked

Double press the subscription

button on the base. The

subscription light will ﬂash red

and green.

When the subscription

light becomes solid green,

the headset and base are

subscribed to one another.

Double press the subscription

button on the base. The

subscription light will ﬂash red

and green. Press the volume

up button on the headset for

three seconds until the headset

indicator light turns solid green.

When the subscription light on

the base becomes solid green,

the headset and base are

subscribed to one another.

NOTE If the subscription process times out after two minutes or

if the subscription process fails, the subscription light will become

solid red for four seconds and then return to its previous state. If

this occurs, try to re-subscribe the headset again.

Subscribing a Master Headset

The headset and base are subscribed to each other at the factory.

In the event that you need to subscribe a new master headset

to the base you can do so one of two ways. You can subscribe

a master headset to the base with the headset docked (secure

subscription) or undocked (over-the-air subscription). In either

case, the system must be idle (not on a call).

Muting the Headset

You can mute/unmute the headset the following ways:

Headset Base

Press the volume down

button (at least 1½

seconds) until the base talk

button indicator light for the

active call becomes solid

red.

Short press (less than one second) of

a red desk phone or PC talk button

on the base will unmute the headset.

You cannot mute the headset using

the desk phone or PC talk buttons.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 24 25

Comments to this Manuals

No comments

Plantronics WO101 User Manual Page 15

Comments to this Manuals

Related products and manuals for Headphones Plantronics WO101