Plantronics CS351N Installation Manual download pdf (Page 6)

1. Adjust headband to fit.

2. Rotate voice tube or noise-canceling microphone until it is pointed towards your chin.

To make a call:

1. Take your handset off-hook. Dial tone should sound through handset (if not, check

compatibility—see page 13).

2. Press the call control button on the headset, then dial using the telephone keypad.

To answer a call:

1. Take the handset off-hook.

2. Press the call control button on the headset to answer a call.

To end a call, press the call control button on the headset, then hang up the handset.

NOTE: If either you or the recipient have trouble hearing, please check compatibility (page 13).

NOTE: Depending on preference, you

can replace the pre-installed

leatherette ear cushions with the

alternative foam cushions included.

OROROR

Enable

Disable

1. To pair another headset to the same base, you must first enable the multi-shift

pairing feature. Long press (5 sec.) the speaking volume minor adjust

up button on

back of base until the power indicator light flashes.

2. Place a charged headset in charging cradle and red indicator light on base will flash

for 2 seconds if the multi-shift pairing feature is enabled. Within 10 seconds of doing

so, press either the "+" or "-" listening volume button for 3 seconds until

the headset talk indicator lights to indicate pairing mode, and goes out after

successful pairing. Repeat steps 1 and 2 if headset and base do not link when call

control button is pressed.

NOTE: Only the last paired headset will work with the base. You must NOT be in talk mode (i.e.

on a call) to enable or disable this feature.

To disable the multi-shift pairing feature, long press (5 sec.) the speaking volume minor

adjust

down button until the power indicator light flashes.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Plantronics CS351N Installation Manual Page 6